2N 4G wireless router 2N SpeedRoute - User manual, 1898 v1.02 - Manual (Page 75)

Table of Programmable Parameters 3.2
75
Actual password
Enter the currently valid password for the gateway configuration interface
connection.
New password
Enter a new password to be used for the gateway configuration interface
connection.
Password confirmation
Re-enter the new password for confirmation and prevention of typing errors. If the
re-entered password fails to conform to the preceding parameter, no change is
executed.
Apply button
Push this button to save the new settings. (Button is placed bottom right.)
Firmware
This menu is used for downloading the current gateway firmware, module or
bootloader versions into 2N® SpeedRoute.
Module
Information on the module version and date of issue.
Bootloader
Information on the bootloader version and date of issue.
Firmware 0/1
Information on the firmware version, date of issue and downloading instance
number (behind the ‘#’ symbol). An Active note is added to one of the firmware
instances to indicate the currently used one. The new firmware is stored
automatically, replacing the preceding one, and becomes active after restart.
Thus, whenever restarted, the gateway operates with the firmware version with
the highest serial number.
Choose…
Push this button to choose the path to firmware for upgrading.