2N 4G wireless router 2N SpeedRoute - User manual, 1898 v1.02 - Manual (Page 84)

Voice Function 4.1
84
processing a standard outgoing call. Any dialling during the BabyCall timeout cancels
this function and a standard outgoing call can be made.
16 or 12 kHz Tariff Pulses
2N ® SpeedRoute has a tariff pulse transmitter. You can use the pulses for outgoing
call metering and/or billing. 2N ® SpeedRoute offers pseudo tariff metering only – its
tariff pulses do not correspond to the provider’s call tariffs but are transmitted
according to the pre-programmed parameters. Remember to program the routing
table parameters in order to set tariff metering for calls with different prefixes.
You can also program 2N
® SpeedRoute to transmit tariff pulses as call
connect/disconnect signalling if your PBX cannot receive telephone line polarity
reversal signalling.