Table of programmable parameters 3.2, Sntp, Snmp - basic – 2N 4G wireless router 2N SpeedRoute - User manual, 1898 v1.02 User Manual

Page 63

Advertising
background image

Table of Programmable Parameters

3.2

63

Enable authentification

Enable/disable the use of another device-specifying parameter within the VRRP

network. Authentication is a sort of safety lock against unintentional misuse of

devices with identical IDs rather than a password or unauthorised access

prevention.

Password

Enter the VRRP device password. It is included in every VRRP packet transmitted

by the device.

Setting options:

1-8 alphanumeric characters

Advertisement interval

Set the interval for sending state notifications to IP address 224.0.0.18.

SNTP

SNTP (Simple Network Time Protocol) provides time synchronisation with the

selected server. A client supporting the SNTP only cannot be a server for other

clients.

Enable

Enable/disable the use of the NTP server as defined below.

NTP server name

Enter the NTP server domain name or IP address.

Update period

Enter the synchronisation interval for the selected NTP server.

Setting options:

5-43,200 min

Current local time

If time synchronisation was successful, this item shows the local date and time.

The parameter cannot be configured. If the NTP server is not configured, the date

and time data are reset to Thu Jan 1 00:00:00 2009 after every gateway restart.

SNMP - Basic

SNMP (Simple Network Management Protocol) is intended for IP network

administration. SNMP allows the uninterrupted collection of various data and

following evaluation for network administrator. Most tools for network

administration is based on this protocol.

Advertising