Setup menu > services, Table of programmable parameters 3.2, Dhcp – 2N 4G wireless router 2N SpeedRoute - User manual, 1898 v1.02 User Manual
Page 59
Advertising
Table of Programmable Parameters
3.2
59
Destination network
Destination network is used for setting of network, which will be used for data
connection.
Gateway
Gateway is used to set the address for data routing in selected network.
Apply NAT
This parameters is used to set whether the NAT (Network address translation) will
be applied for according line.
Status
Status is used for information, whether is the line of table actually used or not.
Options:
active / not active
Enable
Enables the static route functionality.
SETUP Menu > Services
DHCP
Advertising