2N SmartGate - User Manual - Manual (Page 25)

20
Caution! With regard to potential SmartGate memory data structure change, the
PCManager and SmartGate are "matched" according to versions. A PCManager
version can be used for SmartGate programming that differs from the SmartGate
version by a letter following the version number (e.g.1.00A). The PCManager itself
identifies this fact and notifies you.
8.1.4. Monitoring
Monitoring is active when SmartGate is in operation and registered to the GSM
network. If SmartGate is not registered to GSM, the COM is blocked and no monitoring
can be made.
This simple informative function helps you identify:
· The GSM module type and IMEI ID;
· The SIM card IMSI ID and selected SMS service centre necessary for SMS
sending;
· The GSM provider's name and signal strength received by SmartGate - this
information helps you find the optimum signal location (the information is updated in
10s intervals);
· The SmartGate line status – standby, outgoing call, incoming call including
telephone number. The COM is locked during dialing and incoming call ringing, so
the PCManager reports COM blocking.