2N SmartGate - User Manual - Manual (Page 39)

34
Route to
It is possible to route incoming GSM call to FSX or FXO interface, or reject it.
Remaining settings are planned to use for CallBack option in future.
Setting options:
FXS -incoming call is routed to FXS
FXO -incoming call is routed to FXO
reject -incoming call is rejected
Default setting: FXS
Dial in
Parameter "Dial in" is used for automatic connection to switchboard operator, or
directly to other subscriber. If this parameter is blank, calling person has
telephone line fully at disposal and has to dial the subscriber number by DTMF.
Setting options: 0-16 characters (0-9,*,#)
Default setting: blank