2N SmartGate - User Manual - Manual (Page 43)

38
COM enable
With this parameter you can enable/disable the serial interface function. You can
disable communication in the operating mode, maintaining the special
programming mode after power up.
Setting options: YES/NO
Default setting: YES
Time period for GGMC SMS [h]
Time interval for GGMC SMS sending. GGMC = GSM Gateway Monitoring
Centre. The "0" setting means that the function is disabled.
Setting options: 0-255 h
Step: 1 h
Default setting: 0
Telephone number for service SMS
Telephone number for service SMS. The number is common for GGMC SMS and
"LOW CREDIT" SMS on prepaid SIM cards.
Setting options: 0-16 characters (0-9,*,#,+)
Default setting: blank
8.2.7. Initialization
All programmable parameters are arranged in tables according to their functions. You
can initialize either all parameters at once or one table of parameters.
8.2.8. Security Parameters
PIN – value
Fill in the PIN value for automatic PIN entering upon SmartGate power up. It is
applied only if the SIM card is PIN secured. If the given PIN fails to match the
SIM, it is deleted automatically. If entered via a telephone line upon SmartGate
start, the PIN is stored automatically.
Setting options:
0, 4-8 characters (0-9)
Upon full initialization: blank