2N SmartGate - User Manual - Manual (Page 6)

1
1. SmartGate purpose
1.1. Basic Functions
· The primary purpose of SmartGate is to transmit voice between GSM network and
attached phone terminals. You can connect terminal with FXO interface (trunk line
of PBX, phone set, answering machine etc.) to FXS interface on SmartGate
(connector with phone icon) and terminal with FXS interface (extension line of PBX)
to FXO interface on SmartGate (connector with crossed out phone icon).
· You can establish data connections (GPRS, CSD), fax connections (PC-FAX only)
and send/receive SMS using SmartGate in combination with a PC and appropriate
software.
· You can send an SMS to a pre-programmed number using the SMS sending input.
1.2. Advantages of SmartGate Use
· Call cost cutting – the calls are routed to GSM or analog network according to their
number prefix. Route all GSM calls from PBX to SmartGate to save a lot on PSTN –
GSM calls.
· Easy installation – you can easy program SmartGate as you need with enclosed SW.
· You get all you need in the delivery – your SmartGate delivery contains all you need
to operate the system (the power supply adapter, telephone cables, PC serial cable,
SMS input connector, CD-ROM with software).
· Solution for sites without telephone lines – such as mountain chalets, exhibitions,
conferences, etc.
· DialThru technology – all your calls will be routed most cost-effective way.
· Follow-me function – you newer miss an incoming call from analog network.
Incoming call will ring on connected phone and on your mobile phone too.
· CLIP - SmartGate is equipped with the FSK-based CLIP feature, so if a terminal
capable of receiving the CLIP is used you know the caller‘s number.
· Quick data connection – SmartGate transmits data using the high-speed GPRS
connection (GPRS class 10, max. 85.6 kbps).
· SMS sending input – simply send an SMS to a pre-programmed number by closing
the contact. Recommended for easy supervision, simple securing, etc.
· Radiation hazard minimization – you are not exposed to a direct effect of the
antenna RF electromagnetic field while telephoning as opposed to mobile telephones.
· Full GSM coverage - SmartGate is available as tri-band for European markets
(900, 1800 and 1900MHz), and as tri-band for the American market (850, 1800 and
1900MHz).