2N VoiceBlue MAX v1.2 User Manual
Page 65
65
Incoming SMS routing
This section helps you set the incoming SMS routing rules, which are included in the
incoming SMS routing table.
Add record
Disabled – enable/disable the selected routing rule.
Message from SMS group
– select the SMS group that receives the SMS.
Action type
– select the action for the received SMS:
Autoclip routing – the incoming SMS will be routed according to the
AutoCLIP table records.
Deliver to user – the SMS will be delivered to the selected user.
Drop message – the SMS will be dropped.
Deliver to user
– select the SMS addressee. This option is valid only if Action
is selected.
type = Deliver to user
set the rule validity time.
Time limitation –
Days limitation – set the days in a week on which the rule shall be valid.
e
set the filter for the SMS sender telephone number (CLIP). If the s
Clip mask –
lected mask matches the CLIP, the SMS will be routed according to the rules set
above. If not, the SMS will be dropped. The character replaces any string of
*
characters (789789789=789*, e.g.). The character replaces any character
?
(789789789=789??????, e.g.).
Text begin
– set the string to be matched against the SMS text beginning. If a
match is found, the SMS will be routed according to the rules set above.
Note
The rules are applied to incoming SMS sequentially, starting
from the first rule. If all the set rules are met in a row, the SMS
is routed according to the row.