ADS-TEC OPC8013/8015/8022 - Manual (Page 27)

OPC8013/OPC8015/OPC8022 26
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
5.3 Touch screen
The control system is equipped with a touch screen monitor. The touch screen is internally connected
via the USB interface. The driver software necessary for use is already integrated in the respective
operating system.
Pos : 23 /D atent ec hni k/Bedienung/ St atus-Anzeig en/ SYS- LED/ SYS- LED für VMT 60xx- Serie @ 2\ mod_1260525540269_6.doc @ 6876 @
5.4 Status displays
SYS LED
Depending on the type of flashing different device states are displayed by the SYS LED.
The following signals are displayed:

LED green Device is ready for operation (POWER ON)

LED off Device is switched off (POWER OFF)
Pos : 25 /D atent ec hni k/Schnitts tell en/Sc hnitts tell eneinst ellung/Sc hni ttst elleneins tell ung für VMT-Serie / PLC 500 @ 0\ mod_1158916296612_6. doc @ 517 @