ADS-TEC OPC8013/8015/8022 - Manual (Page 42)

OPC8013/OPC8015/OPC8022 41
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
11 Component replacement
ATTENTION
Make certain that all cables are disconnected and
that no voltage is connected to the device!
11.1 Opening the service slot
Remove the four screws for the service slot on the rear of the device. The screws can be removed with
a size Tx 10 screwdriver. The rear cover can be tilted forward and removed using the groove on the top
side of the service slot.
Fig. 9: