ADS-TEC OPC8013/8015/8022 - Manual (Page 28)

OPC8013/OPC8015/OPC8022 27
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
6 Interfaces
6.1 Interface setup
Interface IRQ Address
COM1 4 3F8h
Pos : 26 /D atent ec hni k/Schnitts tell en/Spannungs versorgung/Spannungs versorg ung f ür VMT60xx- Seri e @ 2\ mod_1260450284020_6. doc @ 6853 @
6.2 Voltage supply 24V DC
The supply voltage is fed to the device via a lead-through terminal with screw connection. (The figure
shows the socket inside the device).
PIN number Signal name
1 24V DC
2 PE
3 0 V DC
Technical data of the power adapter
• Input voltage: 19 to 29V DC
• Max. switch-on current: 7A(10ms)
T 60xx @ 1\ mod_1246631044840_6.doc @ 5885 @
Pos : 29 /D atent ec hni k/Schnitts tell en/USB-Ansc hlus s/U SB-Ansc hl uss f ür VMT 60xx @ 2\ mod_1260457598122_6. doc @ 6860 @
6.3 USB connections
The USB interfaces are used for connecting peripherals with USB connection. These interfaces comply
with the USB 2.0 standard requirements.
PIN number Signal name
1 VDC
2 D -
3 D +
4 GND
Information:
The USB interfaces can be individually locked by using the "Lock USB"
software tool.