ADS-TEC OPC8013/8015/8022 - Manual (Page 47)

OPC8013/OPC8015/OPC8022 46
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
11.5 Replacing the lithium battery
Loosening / removing the retaining bracket
This battery is secured by a plugged-in retaining bracket. The retaining bracket can be removed from
the battery holder by carefully lifting the external tabs with a flat tool (screwdriver).
Installing / replacing the battery
The lithium battery can now be removed. It may only be replaced with a battery of the same type. The
type of battery to be used is:
Lithium battery 1/2AA 3V (e.g., ads-tec part number: DZ-SONS-04100-0)
Ensure the correct polarity when inserting the battery
WARNING
There is a risk of explosion if the battery is
replaced with the wrong type or with the wrong
polarity. Observe the regulations for
environmentally sound disposal of used batteries.