ADS-TEC OPC8013/8015/8022 - Manual (Page 45)

OPC8013/OPC8015/OPC8022 44
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
11.3 Replacing the fan
ATTENTION
Before the device fan can be replaced, the fan
cable must be unplugged!
Removal
Use a size Tx 10 screwdriver to remove the fan screws. The fan can then be lifted out and replaced with
a new one.
Installation
Screw the previously removed screws back in and plug the fan cable in again.