AirLive AirMax5 - Manual (Page 100)

6. Command Line Interface
93 AirLive AirMax5 User’s Manual
‰
Command> set security airmax5 wpa2-psk aes interval 300 12345678
2-psk !
„ >
‰
‰ Example:
Command> set ratemode full
Rate mode is Full(20Mhz)
„ set noise immunity <on | off>
the noise immunity level
‰ Example:
Example:
Radio1 authentication type : wpa
set ratemode <full | half | quarter
Purpose:
‰ Purpose: To enable/disable
Command> set noise immunity on
Noise immunity is enable
6.5 Enabl
Commands to
„
‰ ble UPnP
‰
pnp)descDocName: BD.xml
UPnP with descDocUrl=http://192.168.1.1:80/BD.xml
.168.1.1 port=80
nf_dir_path=/var/upnp
itializing UPnP SDK ...
UPnP SDK Successfully Initialized.
Directory to /var/upnp
ry.
rverPort(): 49152
with descDocUrl http://192.168.1.1:49152/BD.xml
y registered.
t. Listening for requests ...
e/Disable Commands
enable or disable settings
( enable/disable ): <enable | disable> upnp
Purpose: To enable or disa
Example:
Command>enable upnp
(U
UPnP Daemon: Intializing
UPnP Daemon: ipaddress=192
UPnP Daemon: co
In
Setting the Web Server Root
Succesfully set the Web Server Root Directo
UpnpGetSe
Registering the root device
cessfull IGD root device suc
dvertisements Sen A