2 device status, 1 device information 5.2.2 wireless information – AirLive AirMax5 User Manual

Page 82

Advertising
background image

5. Web Management2: System Configuration and Status

75

AirLive AirMax5 User’s Manual

5.2 Device Status

When you click on the “Device Status” on the top menu bar, the sub menu for device status
will appear.


5.2.1 Device Information

This page shows the general information about AirMax5 such as firmware version, device
IP/MAC, WAN IP/MAC(in router modes), Gateway IP(in router modes), DNS IP…etc.
Below are some additional explanations on some status information of this page:
„

CPU Loading Display the CPU usage.

„

Memory Information Display how much memory is used and free.

„

Firmware version: The first AirMax5 firmware release is 1.00e10. In general,

AirLive will refer to its firmware as exx (such as e10) version on the release note

„

Wireless MAC: This is the wireless MAC address (BSSID) of this AiMax5. This is the

address to enter on the remote WDS Bridge for the WDS link.

„

Uptime: This is the time that the AirMax5 has been running since last power up.

„

ARP Table Display the corresponding IP and MAC address Table.



5.2.2 Wireless Information

This page shows the information about wireless status such as current operation mode,
wireless traffic, error packets, RSSI, Remote device’s BSSD, connecting State, channel,
and encryption used.

Advertising