Application example: bridge network, 1 preparation for building outdoor bridge networks – AirLive AirMax5 User Manual
Page 115
8. Application Example: Bridge Network
AirLive AirMax5 User’s Manual
108
In this chapter, you will learn to how to build a WDS Bridge network by following our step by
step example. In addition, we will talk about the general concepts and knowledge about
building a long distance connection.
This chapter is divided into 3 sections
9.1: Preparation for Building Outdoor Bridge Networks: This section provides
basic knowledge about building long distance outdoor bridge connection.
9.2: WDS Bridge vs. Bridge Infrastructure: Here we will discuss the
differences between the 2 bridge mode.
9.3: WDS Bridge Network Example: A step-by-step guide to building a multiple
link Bridge network.
8.1 Preparation for Building Outdoor Bridge Networks
1. Write down the WLAN MAC address in advance
Please remember to write down the WLAN MAC addresses of the AP for installation.
The WDS bridge require to enter remote Bridge’s MAC address for WDS
authentication.
2. Always do a Google Earth search on the intended installation before departing
Please get information on location, elevation, and distance between the points of your
installation site
3. Bring a pair of high powered binoculars for site survey
You might often find that the installation points are difficult to find over long distance.
A pair of hi powered binocular will help finding the objects. Look for landmarks that
are easy to identify.
4. Bring Long Distance Walkie-Talkie System
There are hi-powered offering that can work over distance of 5km or more.
Communication is absolutely necessary on both sides during installation.
5. You need a clear Line of sight
More than 60% of First Fresnel Zone must be cleared for acceptable performance.
8
8.
Application Example:
Bridge Network