AirLive AirMax5 User Manual
Page 9
1. Introduction
AirLive AIRMAX5 User’s Manual
2
z
4.2.3 Site Survey: Site Survey is the connection wizard that will search
for available networks and let you connect with the select network by
simply clicking. It also includes RSSI signal survey for antenna
alignment.
z
4.2.13 Bandwidth Management: Be sure to read about AirMax5’s
powerful Bandwidth Control that allow you to limit up/downlink speed by
interface, IP, MAC address, or IP segment. This section provides
step-by-step examples also.
4.3 WDS Settings: Here explains the WDS setting page. After reading this
section, please go to Chapter 8: Bridge Network example to see
step-by-step instructions on setting up a multi-point WDS Bridge network.
4.4 Router Modes: This section includes WAN port, virtual server, remote
management, virtual servers and all router related settings.
Chapter 5: Web Management 2: Configurations and Status
This chapter explains all the non-wireless settings and status such as IP settings,
Ping Watchdog.
5.1.6 PING Watchdog: PING watchdog is a crucial function to keep your
wireless connection alive. When AirMax5 can’t get a response from
remote devices, it will attempt to re-establish the connection. AirMax5’s
PING watchdog goes the extra step to allow 2 sets of IP to avoid false
alarm.
5.1.8 Configurartion Save and Restore: You should always backup your
configurations so you can restore in the event of system crash.
Chapter 6: Command Line Interface
This chapter explains all the commands in the Telnet and SSH interface. Be sure to
“save config” after making all changes. In case you forget a command, just type
“help” to display all available commands and their usage.
Chapter 7: Antenna Alignment
This chapter provides detail information about AirMax5’s antenna. It also provides
step-by-step instructions on how to make antenna alignment using LED indicator or
Signal Survey function.
Chapter 8: Application Example : WDS Bridge
This chapter tells you the basic knowledge about building a long distance connection.
A step-by-step instruction on how to build a multipoint WDS network is provided.
Chapter 9: Emergency Firmware Recovery
It your AirMax5 can no longer be access due to firmware crash. You might be able
to recover it following the procedure on this chapter.