AirLive AirMax5 - Manual (Page 93)

6. Command Line Interface
AirLive AirMax5 User’s Manual 86
„
‰ Purpose: Show current wireless security policy
‰ Example:
urity policy: none
„
‰ rt IP settings
‰
ngs
an ip type : static
68.1.1
how firmware version
how vlan ssid list
show wds settings
show advanced wireless
show syslogd
„
‰ Purpose: Show the noise immunity setting
‰ Example:
w noise immunity
is enable
show wireless security
Command> show wireless security
Radio1 sec
show <wan | lan> settings
Purpose: Show LAN or WAN po
Example:
Command> show lan setti
L
Lan ip address : 192.1
Lan ip netmask : 255.255.255.0
Lan ip gateway : 192.168.1.254
Lan ip dnsserv : 0.0.0.0
s
s
show noise immunity
Command> sho
Noise immunity
6.4 Se
The Set Commands are to make changes to the AirMax5’s settings
„
‰ Purpose: Set the timeout value for HTTP management
t Commands
set http timeout <timeout value in minutes, 1-999>
‰ Example: