AirLive AirMax5 - Manual (Page 87)

6. Command Line Interface
AirLive AirMax5 User’s Manual 80
Please wait a moment for site survey...
‰ urpose : Display continuous RSSI for the remote AP/Bridge
Command> site survey
„ signal survey <bssid> <channel>
P
.
6.2 Debugging Commands
_debug command looks similar to a Set command, please use the Set command instead.
log out HTTP
Example :
Command> z_debug http logout
nable or disable signature check on firmware
ature disable
ABLED!!!
‰ . It
c m
sid <ssidname> to replace the current ssid name with a new one
‰
Command> z_debug add ssid air1
your AirMax5
_debug reboot
Rebooting...
This debugging commands are commands used for manufacturing testing process. If a
z
„ z_debug http logout
‰ Purpose :
‰
„ z_debug signature <enable/disable>
‰ Purpose: E
‰ Example:
Command> z_debug sign
Are you sure ? ( y/n ) : y
Signature check is now DIS
„ z_debug add ssid <ssid>
Purpose: This command will replace the default ssid with the new one
wil no
l t add an additional SSID. We recommend to use the following
om ands instead:
„ add ssid <ssidname> broadcast (enable/disable) to add a new SSID
„ set s
Example:
„ z_debug reboot
Purpose: reboot ‰
‰
Example:
Command> z