AirLive AirMax5 - Manual (Page 48)

4. Web Management-Wireless and WAN Settings
41 AirLive AirMax5 User’s Manual
The easiest way to enter AckTimeOut value is by entering the distance in “Operation
Mode -> Setup -> Distance”. The AirMax5 will then calculate and enter the correct
value for you.
„ Enable Radio eXtended Range: XR is Atheros eXtended technology to increase
range. When XR is turned on, the radio can increase the receiver sensitivity greatly.
However, performance may be reduced significantly also. Use this mode only if you
can trade more distance for lower performance.
„
Enable privacy separator: Select the check box to prohibit data transmission
between client stations. This function is also known as “Client Isolation”.
„
Enable 802.1d: Enable the Spanning Tree Protocol to prevent forming a network loop.
This option is especially important for WDS Bridge mode.
„
Enable 802.11d: Also known as “Global Roaming”. 802.11d is a standard for use in
countries where systems using other standards in the 802.11 family are not allowed to
operate.
4.2.10 Access Control (ACL)
Operation Mode -> Setup -> Access Control
The AIRMAX5 allows you to define a list of MAC addresses that are allowed or denied to
access the wireless network. This function is available only for Access Point and AP
Router modes.