AirLive AirMax5 - Manual (Page 94)

6. Command Line Interface
87 AirLive AirMax5 User’s Manual
> set http timeout 10
„ set system <contact |location> <string up to 60 characters>
> set system location 60
System Location: 60
set system name <string up to 32 characters>
Purpose: Set system’s name
> set system name airlive
System Name: airlive
„ set mac filter mode <MAC filter mode, disabled/grant/deny>
‰
> set mac filter mode disabled
„ g up to 32 characters>
‰ string
‰ Example:
string for read: test
„ terval in minutes, now no limit
‰
‰
Command
HTTP timeout: 10 minutes
‰ Purpose: Set the system’s location and contact info
‰ Example:
Command
„
‰
‰
Example:
Command
Purpose: Set MAC filter mode or disable MAC filtering.
‰ Example:
Command
mac filter mode is set to disabled
set community string <read |
Purpose: Set SNMP community
write> <strin
Command> set community string write test
community string for write: test
> set community string read test Command
community
set radius server reattempt <reattempt in
in seconds>
Purpose: set radius server reattempt interval in minutes
Example:
Command> set radius server reattempt 20
/etc/wlan/ap_service: 17: uname: not found
killall: wpa_supplicant: no process killed
/etc/wlan/ap_service: 17: uname: not found
l.o Using /lib/modules/2.4.25-LSDK-5.1.0.42/wlan/ath_ha