AirLive AirMax5 - Manual (Page 103)

6. Command Line Interface
AirLive AirMax5 User’s Manual 96
aa is deleted
„ ment>
‰ ete a WDS link
‰
s bridge
e wds <comment> successful!
„
‰
‰
th_hal.o
th_rate_atheros.o
th_dfs.o
2/wlan/ath_ahb.o
<mapping sub-ioctl turbo to cmd 0x8BE0-1>
<mapping sub-ioctl set_installmode to cmd 0x8BE0-75>
8BE0-76>
sub-ioctl set_thresbetter to cmd 0x8BE0-78>
<mapping sub-ioctl set_thresbest to cmd 0x8BE0-79>
0-17>
ctl authmode to cmd 0x8BE0-3>
octl cwmin to cmd 0x8BE3-1>
md 0x8BE3-2>
ETLINK answers: No such file or directory
: No such file or directory
adius server primary successfully
„
‰ dius server
‰
mac filter a
delete wds <com
Purpose: To del
Example:
Command> delete wd
delet
add radius server primary
Purpose: to add a primary radius server
Example:
Command> add radius server primary
enter server IP:
192.168.1.100
enter port number (1~65535):
655
enter shared secret:
123
enable server (yes/no):
yes
/etc/wlan/ap_service: 17: uname: not found
killall: wpa_supplicant: no process killed
/etc/wlan/ap_service: 17: uname: not found
Using /lib/modules/2.4.25-LSDK-5.1.0.42/wlan/a
Using /lib/modules/2.4.25-LSDK-5.1.0.42/wlan/a
Using /lib/modules/2.4.25-LSDK-5.1.0.42/wlan/a
Using /lib/modules/2.4.25-LSDK-5.1.0.4
<mapping sub-ioctl set_threslower to cmd 0x
<mapping sub-ioctl set_threslow to cmd 0x8BE0-77>
<mapping
<mapping sub-ioctl maccmd to cmd 0x8BE
<mapping sub-io
<mapping sub-i
<mapping sub-ioctl cwmax to c
RTN
RTNETLINK answers
add r
add radius server <primary | secondary>
Purpose: to add a primary or secondary ra
Example: