AirLive POE-200CAMv2 - Manual (Page 11)

AirLive POE‐200CAMv2 User’s Manual
10
Chapter 5 How to Use
This chapter introduces how to monitor the image from the device using Microsoft web browser. The IP
camera can be used with Microsoft web browsers and Intelligent IP Installer in Windows operation systems. This
document focuses on introducing you to Microsoft web browser. The recommended browser for Windows is
Internet Explorer 6.0. If you want to know how to use IP camera with Intelligent IP Installer, check Intelligent IP
Installer User’s Manual in Windows operation systems.
The functions of the device should be set by the Administrator. For further instructions on setting the device, see
“Setting the Camera.”
5.1 Accessing the IP Camera
1. Start your web browser, and enter the IP address or host name of the IP camera in the Location / Address field of
your browser.
Note：
• If you only want to view the video without setting page, enter “ http://<IP>/index2.htm ” as your web URL.
2. Use the default account “admin” and default password “airlive”.
Note：
• The default user name “admin” and the password are set at the factory for the administrator. You can change
them in the Account Menu under Setting on page 25.
3. The monitor image will be displayed in your browser.