AirLive POE-200CAMv2 - Manual (Page 76)

AirLive POE200CAMv2 User’s Manual
75
【 Note】 When to configure?
AirLive CamPro Express system default are same as device default, only when you want to change PW from
AirLive CamPro Express or when you find the PW of device has been changed in web configuration program
Sensor (Digital Input)
Many video gateways and LAN cameras has GPIO port. The digital inputs can be connected to sensors, while
digital outputs can be connecting to relay switches.
In System Setup tree, a sensor is represented by (un-configured sensor) or (configured sensor)
icon, and relay switch is represented by icon.
When you select a sensor in the System Setup tree, the toolbar becomes:
But the two buttons on the right will appear only after a sensor has been configured.
Sensor Setting
Click the [Sensor Setting] button to bring up the Sensor Setting dialog, as shown below: