AirLive POE-200CAMv2 - Manual (Page 73)

AirLive POE‐200CAMv2 User’s Manual
72
1. If only one alarm is triggered, the different device breached by “live video” alarm action will be
displayed on the 4 split screen of Monitor Program and is arranged starting from upper-left to
upper-right, lower-left, and lower-right.
2. If live video is breached by different alarm source, live video is display respectively. The live video of
latest event will replace the live video of old event. If the number of live video is greater than 4, they
will be displayed rotationally.
3. Dismiss the live video in 4-split of monitor program: click “Cancel Alarm” button in Monitor Program.
Preset Setting
Click the Preset button to bring the preset setting dialog, as shown below:
【 Step1】Select a Preset Location from the
dropdown list and give it a meaningful name
in Preset Name.
【 Step2】Press “||” to pause the video
location.
【 Step3】Adjust the gimbal direction using the
narrow buttons.
【 Step4】Click Setup to store this location
into the gimbal, if it supports preset location.
[Note] This will also overwrite the previous
setting stored in this preset location. Preset
locations can not be removed.
Set the other preset locations in the same
process. Click “Exit” to leave this dialog.