AirLive POE-200CAMv2 - Manual (Page 38)

AirLive POE200CAMv2 User’s Manual
37
4. Follow the steps to set the other Motion Detection.
5. Click the OK to save the setting.
Note：
• Be careful! Motion Detection function don’t work with Patrol function at same time.
6.2.6 System Log
The System Log function allows users to review any changes and events happened. The system starts
logging automatically after started.
Remote Log: Enables user to send the log data to a specified log server.
6.2.7 Alarm Input
When you click Alarm Input on the Advance mode menu, the Alarm input setting menu appears. You can set
in this menu to control the external alarm input of I / O port on the rear of the device linked to FTP, SMTP, and
HTTP sending function.