AirLive POE-200CAMv2 - Manual (Page 75)

AirLive POE‐200CAMv2 User’s Manual
74
Image Quality
【 Note】 Reset button is activated while select
camera image under LanCam/Video Server, by
clicking this button to get the real time Image Quality.
User may drag the scroll bar to right or left direction for your viewing preference and get real time quality.
Remove LanCam
Click the Remove LanCam button to remove the video node. You will be asked to confirm the removal. If you
had dragged this video source to the e-map, the icon of this camera in the e-map will also be removed.
HW Password
【 Step1】Select the device icon in the System
Setup area, and click HW Password button
from the Menu Bar to bring up the setting window.
Current UserName/Password：
The default value for current username and current
password is same as device default.
New UserName/Password：
Change information and save to both
AirLive CamPro Express and Web configuration of
selected device.
【 Step2】Click OK to save the setting.
Select the Image icon of a LanCam/Video Server in the System Setup area, and
click Image Quality button from the Menu Bar to bring up the Image Quality
window.