AirLive POE-200CAMv2 - Manual (Page 62)

AirLive POE200CAMv2 User’s Manual
61
Button Overview
When you select eMap icon, Menu Bar will display the following functions:
Button Use to
Add Area: This button allows you to add a new area under eMap branch.
Remove SubArea: This button allows you to remove all areas and devices that are under the
eMap branch.
When you select the Area icon, Menu Bar will display the following functions:
Button Use to
Rename the Area: This button allows you to edit a name of a selected area.
Remove Area: This button allows you to remove a selected area and all devices in that area.
Upload eMap: This button allows you to upload a blueprint or map to a selected area.
Refresh eMap: This button allows you to refresh a blueprint or map from your PC to get
updated in case a new eMap was uploaded from server or another client access.
Resize eMap icon: This button allows you to change the ratio of the device icons to display
on the eMap interface.
Add LanCam: This button allows you to add a new IP Cam, Speed Dome and Fix Dome to
the area.
Add Video Server: This button allows you to add a new video server to the area.
Add IO Controller: This button allows you to add an IO controller to the area.
Auto Add Device: This button allows you to automatically search all IP cameras/Video server
that are located at the same subnet within a LAN environment. Auto add device just support
the IP cameras/Video server with UPnP supported.