AirLive POE-200CAMv2 - Manual (Page 84)

AirLive POE200CAMv2 User’s Manual
83
7.5.6 PT Control Interface
If your IP camera or analogue camera under Video Server has PTZ function, you may use AirLive CamPro
Express control interface to view different angle of Camera by clicking button on PT Control Interface.
1: PT Speed: You may select the drop list to change
speed of camera movement.
2: PT control: PT interface consist of a control icon
which can change view angle of your camera to 4
directions manually.
3: - (Zoom out)：to get PT camera zoom out.
4: + (Zoom in)：to get PT camera zoom in.
5: AutoPan: to get PT camera auto panning.
6: Stop: to stop PT camera’s auto-action.
7: Preset Point: by this drop list, you could select
preset point (Preset point is configured in Admin
program).
7.5.6 System Setting
Relay Setting/Cancel Alarm
【 Step1】Click “Relay Setting” button
【 Step2】Select the “Relay Location” to remote control
Digital Output (light, for example, via Internet) to on or
off. Control facility via “Relay Setting” may involve
electronic danger, please consult your system integrator
and get their professional support.
【 Note】 “Relay Setting” button use the same button of Cancel Alarm, the text varies
according to alarm status.
1
2
3 4
5
6
7