AirLive POE-200CAMv2 User Manual
Page 68
AirLive POE200CAMv2 User’s Manual
67
Image Setting
All the setting item defined as following:
z
Nodes: the number of camera nodes of LanCam and video server could be varied base on what models
is selected.
z
Location: to differentiate the device image source. Please give a meaningful description that identifies
the installed location.
z
Device
Type: here are two options of device type which are the Speed Dome or General-CCD. Speed
Dome should only support the models which are on the list, but General-CCD has no model limitation.
You can freely connect to whatever General-CCD as you like. (Currently we support General-CCD only.)
z
Orientation:
Normal or Inverted to get image up-side down.
z
Alarm Recording: you may define the “frame per second” and the seconds of “pre-alarm” and
“post-alarm” of alarm recording.
z
Save Location Alarm1: here display the alias of recorded path. For detail, please refer to Section D.3.5.
Storage.
z
Schedule Recording: you may define the “frame per second” (only for MJPEG camera) and recording
schedule.
z
Save Location Schd1: here display the alias of recorded path. For detail, please refer to Section D.3.5.
Storage.
z
Recording Type: Schedule recording could be activated by clicking to select “Always” or “Schedule”,
and check Recording Type of “Motion Detection” to significantly reduce the storage of schedule
recording.