AirLive POE-200CAMv2 - Manual (Page 78)

AirLive POE200CAMv2 User’s Manual
77
1. Node: is the serial number of this relay on the current device.
2. Location: give a meaningful name for this relay.
3. Default Status: set the default status of this relay.
4. Click [Create] to save the configuration and leave the dialog, or click [Apply] to save the configuration and
continue to set another relay on the current device or modify current setting.
Remove Relay
Click the [Remove Relay] button to remove the selected Relay. You will be asked to confirm the deletion.
Tools in Menu Bar of eMap interface
eMap tools bar will appear above the eMap
Interface area after the picture that you uploaded
to the eMap Interface area.