AirLive POE-200CAMv2 - Manual (Page 60)

AirLive POE200CAMv2 User’s Manual
59
【 Step3】 Select the “Function” tab to designate
function to a group.
Select the function list and move them from
“Unselected function” to “Selected function”. Click
“OK” to continue.
【 Step4】 After setting both Tab of “General” and
“Function”, click “Create” to save the setting.
Modify Group
【 Step1】Select User Group
Select User Group icon in the System Setup area,
the User Group Table display in the right area, when
select the icon from the User Group Table, the User
Group Setting Button will display in the Menu Bar
accordingly. Then click the Edit User button in the
Menu Bar.
【 Step2】Modify User group Information. You may
change the information by modifying the general
information or function of that user group.