AirLive WLA-5200AP-G - Manual (Page 10)

HARDWARE CONNECTION
Note: Before you starting hardware connection, you are advised to find an
appropriate location to place the Access Point. Usually, the best place for the
Access Point is at the center of your wireless network, with line of straight to all
your wireless stations. Also, remember to adjust the antenna; usually the higher
the antenna is placed, the better will be the performance.
1. Connect to your local area network: connect a Ethernet cable to one of
the Ethernet port (LAN1,or LAN2) of this Wireless Access Point, and the
other end to a hub, switch, router, or another wireless access point.
2. Power on the device: connect the included AC power adapter to the
Wireless Access Point’s power port and the other end to a wall outlet.
3. Configure your PC: Make sure your local PC(s) has wireless network
adapter(s) installed.
5 WLA-5200AP v2 User’s Manual