AirLive WLA-5200AP-G - Manual (Page 40)

You can choose the Ad-Hoc mode and Infrastructure mode Network Type
The SSID differentiates one WLAN from another; therefore, all
access points and all devices attempting to connect to a specific
WLAN must use the same SSID. It is case-sensitive and must
not exceed 32 characters. A device will not be permitted to join
the BSS unless it can provide the unique SSID. An SSID is also
referred to as a network name because essentially it is a name
that identifies a wireless network. SSID
Allow user to set the channel manually or automatically.
If set channel manually, just select the channel you want to
specify.
If “Auto” is selected, user can set the channel range to have
Wireless Access Point automatically survey and choose the
channel with best situation for communication.
The number of channels supported depends on the region of
this Access Point. All stations communicating with the Access
Point must use the same channel. Channel
Number
Same as the AP/Client mode Advance
Settings
Security
Same as the AP/Client mode’s Security settings
Site Survey
35 WLA-5200AP v2 User’s Manual
Click site survey setup button that will shows the WISP Outdoor
AP list and you can select which WISP AP you want to
connect .
WAN Port
You can choose the different WAN mode , like Static IP,
DHCP,PPPOE,PPTP or L2TP method.