AirLive WLA-5200AP-G - Manual (Page 12)

Client Mode (Infrastructure)
If set to Client (Infrastructure) mode, this device can work like a wireless station
when it’s connected to a computer so that the computer can send packets from
wired end to wireless interface.
To set the operation mode to Client (Infrastructure), please go to “Wireless
JBasic Settings”, in the “Mode” field click the down arrow b to select Client
mode, and then select “Network Type” as “Infrastructure”.
Client Mode (Ad-hoc)
If set to the Client (Ad-hoc) mode, this device can work like a wireless station
when it is connected to a computer so that the computer can send packets from
wired end to wireless interface. You can share files and printers between
wireless stations (PC and laptop with wireless network adapter installed).
To set the operation mode to Client (Ad-hoc), please go to “Wireless
JBasic
Settings”, in the “Mode” field click the down arrow
b to select Client mode, and
then select Network Type as “Ad-hoc”.
7 WLA-5200AP v2 User’s Manual