AirLive WLA-5200AP-G - Manual (Page 16)

WISP (Client Router) Mode
WISP (Client Router) mode
In WISP mode, the AP will behave just the same as the Client mode for wireless
function. However, router functions are added between the wireless WAN side
and the Ethernet LAN side. Therefore, the WISP subscriber can share the WISP
connection without the need for extra router.
To set the operation mode to WISP mode, please go to “Mode
JWISP”, click the
“Setup” button
for configuration
WISP + Universal Repeater Mode
In this mode, the AP behaves virtually the same as the WISP mode, except one
thing: the AP can also send wireless signal to the LAN side. That means the AP
can connect with the remote WISP AP and the indoor wireless card, and then
provide IP sharing capability all at the same time! However, the output power is
divided between 2 wireless sides and proper antenna installation can influence
the performance greatly.
11 WLA-5200AP v2 User’s Manual