AirLive WLA-5200AP-G - Manual (Page 38)

Select the Access Control Mode from the pull-down
menu.
Disable: Select to disable Wireless Access Control
Mode.
Allow: Only the stations shown in the table can
associate with the AP.
Reject: Stations shown in the table won’t be able to
associate with the AP.
Policy Choose
You may enter up to 20 characters as a remark to the
previous MAC Address. Device Comment
Enter the MAC Address of a station that is allowed to
access this Access Point. Device MAC
Press add the Device to the Access Allow list Add
To Remove clients from access to this Access Point,
you may firstly check the Select checkbox next to the
MAC address and Comments, and press Remove Remove
Press to discard the data you have entered since last
time you press Apply Change. Reset
Close this window . Close
33 WLA-5200AP v2 User’s Manual