Security (ap/client/wisp mode) – AirLive WLA-5200AP-G User Manual

Page 26

Advertising
background image

Enable Watch Dog
Watch Interval
Watch Host

Check the box to enable this watch dog function
and set the Watch dog time Interval (1~60 mins)
and type the ip address of the host ip

Press to save the new settings on the screen.

Apply Change

Press to discard the data you have entered since last
time you press Apply Change.

Reset

Security (AP/Client/WISP Mode)

Here you can configure the security of your wireless network. Selecting different
method will enable you to have different level of security. Please note that by
using any encryption, by which data packet is encrypted before transmission to
prevent data packets from being eavesdropped by unrelated people, there may
be a significant degradation of the data throughput on the wireless link.


Authentication Type: Open System or Shared Key/Shared Key/Open System
If Open System or Shared Key/Shared Key/Open System is selected, users will
have to Set WEP keys with an encryption either WEP64 or WEP128. Only the
Open System can set the encryption to None (Without any WEP Key protection
mechanism)
HEX: If you are using hexadecimal numbers (0-9, or A-F).

ASCII: If you are using ASCII characters (case-sensitive).

Ten hexadecimal digits or five ASCII characters are needed if 64-bit WEP

is used

26 hexadecimal digits or 13 ASCII characters are needed if 128-bit WEP is

used

21 WLA-5200AP v2 User’s Manual

Advertising
This manual is related to the following products: