AirLive WLA-5200AP-G - Manual (Page 23)

18 WLA-5200AP v2 User’s Manual
network.
Network Type You can choose the Ad-Hoc mode and
Infrastructure mode
SSID The SSID differentiates one WLAN from another;
therefore, all access points and all devices
attempting to connect to a specific WLAN must
use the same SSID. It is case-sensitive and
must not exceed 32 characters. A device will not
be permitted to join the BSS unless it can
provide the unique SSID. An SSID is also
referred to as a network name
because
essentially it is a name that identifies a wireless
network.
Channel Number Allow user to set the channel manually or
automatically.
If set channel manually, just select the channel
you want to specify.
If “Auto” is selected, user can set the channel
range to have Wireless Access Point
automatically survey and choose the channel
with best situation for communication.
The number of channels supported depends on
the region of this Access Point. All stations
communicating with the Access Point must use
the same channel.
Advanced Settings (AP/ Client/WISP Mode)
It is not recommended that settings in this page to be changed unless advanced
users want to change to meet their wireless environment for optimal performance