AirLive WLA-5200AP-G - Manual (Page 37)

32 WLA-5200AP v2 User’s Manual
network.
• 11A (outdoor): Select to allow only
wireless-G devices on the network.
• 11A (indoor): Select to allow only
wireless-A devices on the outdoor
network.
SSID The SSID differentiates one WLAN from another;
therefore, all access points and all devices
attempting to connect to a specific WLAN must
use the same SSID. It is case-sensitive and
must not exceed 32 characters. A device will not
be permitted to join the BSS unless it can
provide the unique SSID. An SSID is also
referred to as a network name
because
essentially it is a name that identifies a wireless
network.
Channel Number Allow user to set the channel manually or
automatically.
If set channel manually, just select the channel
you want to specify.
If “Auto” is selected, user can set the channel
range to have Wireless Access Point
automatically survey and choose the channel
with best situation for communication.
The number of channels supported depends on
the region of this Access Point. All stations
communicating with the Access Point must use
the same channel.
SSID of extended interface If you choose the Universal Repeater mode
This filed just can let you fill in the SSID of
extended interface, the SSID can be the same
with this device or not; please make sure the
remote AP/Router WDS function is turned off.
Advanced Settings Same as the Bridge mode.
Security Same as the Bridge mode
Access Control Please see details as below :
WDS Control Same as the Bridge mode
Access Control (Repeater mode)
You can define the Access Control Policy Rule , to allow or reject those clients
whose wireless MAC addresses listed in the access control list can /or can’t
access this Access Point.