AirLive WLA-5200AP-G - Manual (Page 46)

TCP/IP
Basic
In this page, you can change the TCP/IP settings of this Access Point, select to
enable/disable the DHCP Client, 802.1d Spanning Tree, and Clone MAC Address.
This field can be modified only when DHCP Client is
disabled. If your system manager assigned you static
IP settings, then you will have to enter the information
provided. IP Address
Enter the information provided by your system
manager. Subnet Mask
Enter the information provided by your system
manager. Default Gateway
Enter the Domain Name Service IP address. DNS
Select Disable, Client or Server from the pull-down
menu.
Disable: Select to disable DHCP server function.
Client: Select to automatically get the LAN port IP
address from ISP (For ADSL/Cable Modem).
Server: Select to enable DHCP server function. DHCP
DHCP Client
Range 253 IP addresses continuing from 192.168.1.1 to
192.168.1.253
Click to show Active DHCP Client table.
Show Client
Clone MAC
Address
You can specify the MAC address of your
Access Point to replace the factory setting.
41 WLA-5200AP v2 User’s Manual