APG FLR Series user manual - Manual (Page 20)

FLR Series Rev. A5, 10/09
20
Automation Products Group, Inc.
APG...Providing tailored solutions for measurement applications
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
9. Using the distance you derived in step 8, measure from the bottom of the
reed switch assembly and mark the center rod at that location.
10. Remove the tape securing the reed switch to the assembly rod. Be careful
not to cut any of the wires or to put pressure in the reed switch.