Atop Technology SW550X User manual - Manual (Page 35)

Atop Industrial Wireless Serial Device Server Series
SW550X
User Manual V 1.1
29
Default Settings in Infrastructure Mode:
Table 3. 1
Caption Default
SSID Null
BSSID (MAC Address) Any (unless enabled)
Topology Infrastructure
Band Mode Automatic Detection
Tx Rate (transmission rate) Best (auto)
Channel Automatic Detection
Bandwidth
1
Automatic Detection
Secondary Channel Automatic Detection
Authentication Mode OPEN
Encryption Type NONE
Default Settings in Adhoc Mode:
Table 3. 2
Caption Default
Radio Off Disabled (box not checked)
SSID Null
BSSID (MAC Address) Any (unless enabled)
Topology Ad-Hoc
Band Mode 802.11a
Tx Rate (transmission rate) Best (auto)
Channel 36
Bandwidth
1
20 MHz
Secondary Channel Disabled
Authentication Mode OPEN
Encryption Type NONE
 Number: This row only shows when the Wireless Profile function is enabled. Choose
the profile that you want to configure by selecting its number.
 Enable: This row only shows when the Wireless Profile function is enabled. Only the
enabled profiles will show in the Profiles page.
 SSID: specifies the SSID (network name) that SW550X should connect to wirelessly.