Atop Technology SW550X User manual - Manual (Page 98)

Atop Industrial Wireless Serial Device Server Series
SW550X
User Manual V 1.1
92
3. Enable Restore Failed Connections to force Virtual COM to automatically restore
failed connections with the serial device server in the case of unstable network
connections.
4. To test the Virtual COM connection, click the Configuration Wizard button and then
click Start button in the pop up window (Fig. 5. 10). If the test passes, all checks
should be in green. To apply the changes in the Configuration Wizard window to
the Control Panel, click on Use Settings. Click on Copy to copy the results to the
system clipboard.
5. To transfer the settings between Virtual COM ports, click on the Copy Settings To
button.
Fig. 5. 10