Atop Technology SW550X User manual - Manual (Page 77)

Atop Industrial Wireless Serial Device Server Series
SW550X
User Manual V 1.1
71
4.2.7 TCP Server Application: Enable Reverse Telnet
Reverse Telnet is useful if a telnet program is used to connect to SW550X and the serial
interface of the SW550X is connected to a Terminal Server. Telnet programs in Windows/Linux
require special handshaking to get the outputs and formatting show properly. SW550X will
interact with those special commands (CR/LF commands) if Reverse Telnet is enabled.
Fig. 4. 15
 Follow Sec. 4.1.1 to configure SW550X in TCP Server mode properly.
 Click on the dropdown box of the Application option and switch to “Reverse Telnet”
to enabled telnet application in SW550X.
 Scroll to the bot tom of the page and click on “Save & Apply” button to save the
changes.