2 link mode: configure sw550x as a tcp client, Link mode: configure sw550x as a tcp client – Atop Technology SW550X User manual User Manual
Page 65
Advertising
Atop Industrial Wireless Serial Device Server Series
SW550X
User Manual V 1.1
59
4.1.2 Link Mode: Configure SW550X as a TCP Client
SW550X Series can be configured as a TCP client in TCP/IP Network to establish a
connection with a TCP server in the host computer. After the connection is established, data
can be transmitted between a serial device and a host computer in both directions; this also
applies to Virtual COM running in the client mode.
Fig. 4. 5
Advertising