Atop Technology SW550X User manual - Manual (Page 76)

Atop Industrial Wireless Serial Device Server Series
SW550X
User Manual V 1.1
70
4.2.6 TCP Client Application: Configure SW550X as a Pair Connection Slave
A Pair Connection Slave, is shown in Fig. 4. 14; it is necessary to pair up with a Pair
Connection Master. Please setup a Pair Connection Master first before proceeding.
Fig. 4. 14
 Follow Sec. 4.1.2 to configure SW550X in TCP Client mode properly.
 Click on the dropdown box of the Application option and switch to “Pair Connection
Slave ” to enabled Pair Connection application in SW550X.
 Match the Destination IP with the settings of Pair Connection Master’s IP that was
setup previously.
 Scroll to the bottom of the page and click on “Save & Apply” button to save the
changes.