1 link mode: configure sw550x as a tcp server, Link mode: configure sw550x as a tcp server – Atop Technology SW550X User manual User Manual
Page 60
Advertising
Atop Industrial Wireless Serial Device Server Series
SW550X
User Manual V 1.1
54
4.1.1 Link Mode: Configure SW550X as a TCP Server
SW550X Series can be configured as a TCP server in a TCP/IP Network to listen for an
incoming TCP client connection to a serial device. After the connection is established between
the serial device server and the host computer, data can be transmitted in both directions; this
also applies whenever the VCOM is running on server mode. Please be reminded that this is
the device’s default link mode.
Fig. 4. 2
Advertising