Atop Technology SW550X User manual - Manual (Page 97)

Atop Industrial Wireless Serial Device Server Series
SW550X
User Manual V 1.1
91
5.2.3 Configuring VCOM Ports
1. If the serial device server is running in TCP Server mode (recommended), a
Serial/IP should be the TCP Client connecting to the serial device server. Enable
Connect to Server and enter the IP Address of the serial device server with the
Port Number specified. The Port Number here is the Local Listening Port for the
serial device server.
2. If the serial device server is running in TCP Client mode, Serial/IP should be the
TCP Server waiting for a serial device server to connect it. Enable Accept
Connections and enter the Port Number. The Port Number here is the
Destination Port of the serial device server. Do not enable Connect to Server and
Accept Connections together.
Fig. 5. 9